Innovation

Outside Manchester, a 50 megawatt tank farm chilled ordinary air to minus 320 degrees and then let it roar back to life, so Britain got its first full scale liquid air battery

By Hugo Rojas · November 19, 2026 · 2:50 PM · 5 min read
Liquid air battery storage tanks at Carrington plant near Manchester Statkraft 12th November 2026 Neilson site Glenifer Braes

On a flat stretch of reclaimed industrial land near Manchester, a row of insulated steel tanks now holds something unusual.

It is ordinary air, chilled until it turns liquid.

Pipes, pumps and a turbine hall surround the tanks.

The figures were modest, but they were the first hard numbers logged from a liquid air plant tied into a live transmission network rather than a laboratory rig.

When the grid needs power, the liquid is allowed to warm, and it expands back into gas with tremendous force that spins a turbine.

So how does a batch of chilled air end up doing the job normally left to lithium and steel cables?

How do you turn cold air into a battery

The trick starts with ordinary atmospheric air, nothing exotic, pulled in and run through a refrigeration process until it condenses into a liquid at around minus 320 degrees Fahrenheit. In that liquid state, air takes up roughly seven hundred times less space than it does as a gas, which is what lets a modest tank farm hold a useful amount of energy.

That liquid sits in large insulated tanks at near atmospheric pressure, essentially a thermos the size of a building.

When the grid operator needs electricity, the liquid air is drawn out and warmed using ambient heat or waste heat from a nearby industrial process, and it boils back into gas with explosive expansion. That expanding gas drives a turbine generator, converting stored cold directly into alternating current for the grid.

The round trip loses energy to the laws of thermodynamics, as every storage technology does. But the appeal is what the tanks do not need, no rare minerals, no finite charge cycles, and a design life measured in decades rather than years.

What does the plant at Carrington actually look like

The facility sits at Carrington, on the edge of Greater Manchester, built on a site already wired into the regional grid.

It followed a much smaller demonstrator at nearby Pilsworth, a 5 MW unit that first proved the concept worked at grid scale years earlier. The Carrington plant delivers 50MW/300MWh of storage capability for six hours, enough to discharge at full power for most of an evening peak.

That duration matters. It outlasts almost any battery chemistry economical at this size.

So the plant’s job is not to catch a brief spike in demand. It is to soak up surplus wind and solar output in the middle of the day and release it in the evening, when turbines slow and panels go dark but households still need heat and light.

What the measured output actually showed

The developer, Highview Power, claims the project is the world’s largest commercial scale plant of its kind. The groundbreaking ceremony at Trafford Low Carbon Energy Park welcomed Greater Manchester Mayor Andy Burnham alongside Highview CEO Richard Butland, marking the formal start of construction. Butland called it a defining step for the company, saying “This is a hugely important moment for Highview, as we kick start work on our first LAES facility in Carrington,” adding the site is “the first in our planned programme of energy storage plants across the UK.”

That earlier Pilsworth unit, rated at 5 MW and 15 MWh, could provide on demand energy to the national grid, with the capability to power around 5,000 homes for roughly three hours. The figures were modest, but they were the first hard numbers logged from a liquid air plant tied into a live transmission network rather than a laboratory rig.

Carrington’s jump to 50 MW and 300 MWh represents roughly a twentyfold increase in stored energy over that original demonstrator, a scale shift that took the technology from proof of concept to something resembling genuine grid infrastructure. Highview secured £300 million in funding from the National Wealth Fund, Centrica, and a syndicate including Rio Tinto, Goldman Sachs, KIRKBI and Mosaic Capital to construct the facility, as detailed in trade reporting on the groundbreaking.

Where the idea still runs into limits

Liquid air storage is not without tradeoffs. Round trip efficiency, the share of energy you get back out compared with what you put in, trails modern lithium battery banks, which can return well over 90 percent of the electricity stored in them.

That gap matters commercially. A liquid air plant makes most sense where duration counts more than peak efficiency, smoothing out a slow evening ramp rather than catching a five minute frequency dip the way a battery farm does.

Even so, the tanks barely wear out. Air costs nothing to source, and that near total absence of degradation over time gives the technology a role batteries cannot easily fill.

Why this plant matters beyond Manchester

Carrington is already drawing a crowd of comparisons. Plans exist for an even larger facility in Scotland, described as a liquid air project with several times the storage capacity of Carrington, a sign the technology is being treated as proven rather than experimental.

That matters for places far from Greater Manchester too. The same thinking has already shaped projects like the molten sodium battery built in Brisbane, another attempt to store renewable power for hours using heat and simple materials instead of scarce metals.

It also echoes a broader pattern on this desk, machines built for one era finding new relevance decades later, not unlike retired turbine blades given a second life far from the grid they once served.

For Carrington, the second life is still ahead of it. A row of steel tanks now carries the weight of keeping Britain’s lights on after the wind drops and the sun goes down.

Hugo Rojas
Hugo Rojas

Hugo is an engineer with strong technical expertise. Multilingual from an early age, his writing combines technical clarity with a strong interest in science and energy.

Hugo_writer
Hugo Rojas

Hugo is an engineer with strong technical expertise. Multilingual from an early age, his writing combines technical clarity with a strong interest in science and energy.